Underfloor heating is turning into increasingly popular. In Scandinavia, round eighty per cent of properties are warmed using this type of heating system, and coverage in the UK is also rising quickly.

As a result more electricians will be tasked with installing electric underfloor heating. While this may be daunting if it is something you have by no means accomplished earlier than, the installation process is fairly straightforward.

The following pointers will aid you install the heating system

Check the sub-floor

Earlier than installing any kind of underfloor heating system, it’s best to check the type of sub-floor the system is to lie on top of.

If there’s a concrete sub-floor, you will need to put insulation board in place, earlier than you lay the heating system.

Without the insulation board, the cold concrete will be heated first, which can dramatically affect the output of the system.

If there’s a timber sub-floor, there will not be the same kind of affect, but you could wish to put tile backer board in place, before laying the heating system.

Making certain the sub-floor is insulated will assist your underfloor heating system work at most efficiency.

Select the system

There are various types of underfloor heating available, and the one that’s finest for you will rely upon many factors. These include the sub-floor, the floor covering and simply personal preference.

You may need to set up an in-screed cable. This is typically installed in new-build houses or extensions, as it housed within the screed – an integral part of the floor.

In fact, this option shouldn’t be practical in case you are installing the heating system under an existing floor.

In this case, you may need to use a heating mat or a flexible element.

A heating mat is the perfect selection if in case you have tile, stone of slate flooring. It heats up very quickly and the heat transference to those materials is high.

If you have laminate or timber flooring, it’s possible you’ll need to consider a flexible heating element. This is very thin and could be laid directly under the flooring, without elevating the floor.

Installation

While laying the underfloor heating system is pretty simple and might be completed by anyone with some DIY experience, the final connection needs to be carried out by a professional electrician.

They will also be able to approve the installation and, if required, test the system.

Upkeep

Once installed, electric underfloor heating wants very little maintenance. There aren’t any moving parts to corrode – so it’s best to anticipate a lifespan of between 15 and 30 years.

If you are you looking for more information on mata grzewcza pod panele stop by our page.