Underfloor heating is turning into increasingly popular. In Scandinavia, round 80 per cent of houses are warmed using this type of heating system, and coverage in the UK can be rising quickly.

Consequently more electricians will be tasked with installing electric underfloor heating. While this may be daunting if it is something you’ve gotten by no means executed earlier than, the set up process is pretty straightforward.

The following pointers will aid you install the heating system

Check the sub-floor

Before installing any kind of underfloor heating system, it’s best to check the type of sub-floor the system is to lie on top of.

If there’s a concrete sub-floor, you will need to put insulation board in place, before you lay the heating system.

Without the insulation board, the cold concrete will be heated first, which can dramatically affect the output of the system.

If there’s a timber sub-floor, there will not be the same form of affect, however you may need to put tile backer board in place, earlier than laying the heating system.

Ensuring the sub-floor is insulated will assist your underfloor heating system work at most efficiency.

Select the system

There are various types of underfloor heating available, and the one that’s finest for you will depend on many factors. These include the sub-floor, the floor covering and simply personal preference.

It’s possible you’ll need to install an in-screed cable. This is typically installed in new-build properties or extensions, as it housed within the screed – an integral part of the floor.

Of course, this option isn’t practical if you are installing the heating system under an existing floor.

In this case, you could wish to use a heating mat or a versatile element.

A heating mat is the perfect alternative in case you have tile, stone of slate flooring. It heats up very quickly and the heat transference to those materials is high.

When you’ve got laminate or timber flooring, it’s possible you’ll wish to consider a versatile heating element. This may be very thin and might be laid directly under the flooring, without raising the floor.

Installation

While laying the underfloor heating system is fairly easy and could possibly be completed by anybody with some DIY experience, the ultimate connection ought to be carried out by a certified electrician.

They will even be able to approve the installation and, if required, test the system.

Maintenance

As soon as installed, electric underfloor heating needs very little maintenance. There aren’t any moving parts to corrode – so you should count on a lifespan of between 15 and 30 years.

In case you loved this short article and you would like to receive more information regarding mata grzewcza pod panele generously visit our own web site.